| BOX SIZE | PRICE PER PAIR |
|---|---|
| 12 Pairs | $1.66 |
| 24 Pairs | $1.46 |
| 48 Pairs | $1.35 |
- Black Foam Nitrile Palm Dipped
- Protection against oil, grease and solvents
- 12 / 24 / 48 Pairs
- EN388 Rating: 4121
- See below for description
- FAQs
Safety Gloves
All Smith & ARROW Work Gloves are have EN388 Certification giving a measured protection from mechanical risks across 4 industry parameters: Abrasion, Cut, Tear, and Puncture resistance – each rated from lowest “1” through to highest “5”. Protection against mechanical hazards is expressed by a pictogram followed by these four constructs (performance levels), each representing test performance against a specific hazard.
1. Resistance to abrasion – Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper
under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove2. Blade cut resistance – Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
3. Tear resistance – Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 5.
4. Puncture resistance – Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
The two most popular types of glove coatings are polyurethane (PU) and foam nitrile. Palm coatings bring important benefits and options to work gloves, including enhanced grip, higher levels of abrasion resistance, and even water resistance. The best rule of thumb is to use foam nitrile in wet conditions and polyurethane for dry conditions.
Load More
FOAM NITRILE SAFETY GLOVES
| WHAT YOU GET: |
|---|
|
Quantity: 12 Pairs Safety Gloves
|
|
Protective Coating: Foam Nitrile
|
|
Colour: Black with Black Palm Dip
|
|
Choose Size: S / M / L / XL / XXL
|
| SPECIFICATIONS: |
|---|
| Foam Nitrile Coating: When in contact with smooth, oily surfaces, the foam nitrile behaves like a sponge. Oil on the surface is soaked up, displaced and grip is improved considerably. Also excellent breathability and dexterity. |
| Shell Material: Polyester: strong, resistant to stretching and shrinking, resistant to most chemicals, quick drying, abrasion resistant. |
| Protection Rating: 4121 |
|
Certifications:
EN388: Gloves giving Protection from Mechanical Risks
Protection against mechanical hazards is expressed by a pictogram followed by 4 numbers (performance levels), each representing test performance against a specific hazard. This glove is rated 4121
EN420: The General Requirements for Protective gloves
All safety gloves must first and foremost earn this standard and specifies that gloves must offer the greatest possible degree of protection
|
| Material Knit: 13 gauge |
| Weight Of Glove: 22 grams |
| Packaging: Each pair on a hang tag. 12 Pairs in a strong cardboard box |
| FEATURES: |
|---|
| When in contact with smooth, oily surfaces, the foam nitrile behaves like a sponge. Oil on the surface is soaked up, displaced and grip is improved considerably. Liquids are soaked up, keeping the coating dry to considerably improve grip. |
| Nitrile-coated gloves offer excellent punctures and tear resistance and is three times more puncture resistant than rubber. |
| In regards to chemical resistance, nitrile stands up well to oil, making it a good choice for metal stamping or handling small oily parts. |
| Foam nitrile is great for industries like automotive, construction and small parts handling. |
| The polyester shell is strong, resistant to stretching and shrinking, resistant to most chemicals, resilient in wet environments, abrasion resistant. |
| Polyester gloves are quick drying and UV resistant. |
| Size | S, M, L, XL, XXL |
|---|---|
| Number of Gloves | 12 Pairs, 24 Pairs, 48 Pairs |
Reviews
Leave a review
FAQs
Safety Gloves
All Smith & ARROW Work Gloves are have EN388 Certification giving a measured protection from mechanical risks across 4 industry parameters: Abrasion, Cut, Tear, and Puncture resistance – each rated from lowest “1” through to highest “5”. Protection against mechanical hazards is expressed by a pictogram followed by these four constructs (performance levels), each representing test performance against a specific hazard.
1. Resistance to abrasion – Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove
2. Blade cut resistance – Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
3. Tear resistance – Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 5.
4. Puncture resistance – Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
The two most popular types of glove coatings are polyurethane (PU) and foam nitrile. Palm coatings bring important benefits and options to work gloves, including enhanced grip, higher levels of abrasion resistance, and even water resistance. The best rule of thumb is to use foam nitrile in wet conditions and polyurethane for dry conditions.
Load More
Related products
You may also like…
