STURDY PLASTIC GLOVE CLIP
- Glove Clip has Double jaw configuration
- Reduces hand injuries by keeping work gloves available to workers at all times and reducing lost glove replacement costs.
- The small end attaches to a belt loop or directly to clothing, including one piece overalls. The large end attaches to a variety of glove sizes and other articles such as cloth sleeve protectors, mechanic towels, ear muffs, utility bags holding ear plugs and safety glasses, and much more.
| Amount of Clips | 1 Glove Clip, 6 Glove Clips |
|---|
Reviews
Leave a review
FAQs
Safety Gloves
All Smith & ARROW Work Gloves are have EN388 Certification giving a measured protection from mechanical risks across 4 industry parameters: Abrasion, Cut, Tear, and Puncture resistance – each rated from lowest “1” through to highest “5”. Protection against mechanical hazards is expressed by a pictogram followed by these four constructs (performance levels), each representing test performance against a specific hazard.
1. Resistance to abrasion – Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper 
under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove
2. Blade cut resistance – Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
3. Tear resistance – Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 5.
4. Puncture resistance – Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
The two most popular types of glove coatings are polyurethane (PU) and foam nitrile. Palm coatings bring important benefits and options to work gloves, including enhanced grip, higher levels of abrasion resistance, and even water resistance. The best rule of thumb is to use foam nitrile in wet conditions and polyurethane for dry conditions.
Load More
Related products
