150mm 6″ PREMIUM BACKING PAD – ORBITAL SANDER
| WHAT YOU GET: |
|---|
| Size: 1 x 6″, 150mm Backing Pad |
| Plus Free Interface Cushion Pad |
| SPECIFICATIONS: |
|---|
|
Material: Polycarbonate Vacuum Moulded
|
|
Holes: 29 holes for dust extraction
|
| Thread: 5/16″- 24 male thread bolt |
|
Max RPMs: 13,000 rpm
|
|
Machine: Orbital Sander
|
| FEATURES: |
|---|
| Amazing dust extraction – next level hook & loop design functionality with extensive hole extraction pattern designed to suit most machines and sanding disc hole configurations |
| Strongest construction premium commercial grade backing pad |
| Perfect for our new Ceramic Net Sanding discs in 150mm |
| Interface pads are placed between the backing plate and sanding disc for multiple reasons. They increase the flexibility of a disc and help to evenly distribute machine movements and applied pressures, and can also increase comfort while you sand. When used with backing pads heat and dust build up is reduced by up to 70%, so your sanding discs last longer and you get a better finish. |
| Quantity | 1 x Backing Pad, 3 x Backing Pads |
|---|
Reviews
They fit the sander perfect and so far last when sanding. Thank you team for the freebies on your monthly special.
replacement hook & loop base for orbital sander. quality backing pad
Leave a review
FAQs
Hook and Loop Velcro Sanding Discs
The grit chosen depends on the job you need the orbital pad for. The grit of a piece of sandpaper refers to the quantity of abrasive units per square inch on the sanding disc. The low number of 60 indicates that there are not very many abrasive grains compared to the high number of 3,000. If there are a high number of units on the disc, the result will be very refined. However, more does not mean that the result will be better. It just depends on the project and the stage of completion.
Grit |
Description |
|---|---|
| 60 to 80 | Extremely coarse sandpaper that is good for grinding rust from metals. |
| 120 to 150 | These disks have a strong impact and remove surface debris quickly. |
| 220 to 320 | The medium-grade sanding disks remove surface debris at a moderate pace. |
| 1,200 to 2,000 | These extremely fine surfaces are excellent for finishing work. |
The holes in the orbital pads allow the sander to suck away the sawdust and throw it in the dust collection bag or chamber. If this does not occur, then dust gets trapped under the sander disk and keeps it from sanding efficiently. The hole configurations of the discs are standardised to suit the hole configuration on most mainstream orbital sanders ie a 125mm 5″ disc sander will usually have an 8 hole configuration. The presence or absence of any holes on the disk must be compatible with the sanding machine that you are using.
Load More
Related products
Hook and Loop Velcro Sanding Discs
5″ 125mm NO HOLE – Hook & Loop Velcro Sanding Discs | Orbital Sander
Hook and Loop Velcro Sanding Discs
2″ 50mm NO HOLE – Hook & Loop Velcro Sanding Discs | Orbital Sander
You may also like…
